View AW20-XXXX_5075483.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

55 modular type filter regulator series aw model aw10 aw20 aw30 aw40 aw40-06 aw20k aw30k aw40k aw40k-06 awm20 awm30 awm40 awd20 awd30 awd40 filtration 5 m 0.3 m (95% filtered particle size) 0.01 m (95% filtered particle size) pages 56 through 60 pages 63 through 66 pages 67 through 70 pages 71 through 74 port size m5 x 0.8 1/8, 1/4 1/4, 3/8 1/4, 3/8, 1/2 3/4 1/8, 1/4 1/4, 3/8 1/4, 3/8, 1/2 3/4 1/8, 1/4 1/4, 3/8 1/4, 3/8, 1/2 1/8, 1/4 1/4, 3/8 1/4, 3/8, 1/2 accessory bracket square embedded type pressure gauge (except for ar10) round pressure gauge panel mount filter regulator series aw filter regulator with back flow mechanism series aw k mist separator regulator series awm micro-mist separator regulator series awd www.datasheet.net/ datasheet pdf - http://www..co.kr/
filter regulator a w10 to 40 56 direct operated, relieving type aw20 accessory/optional specification combinations how to order 03 be 30 1n aw f optional specifications accessories note 3) thread type nil n note 1) f note 2) description 0.02 to 0.2mpa setting metal bowl nylon bowl metal bowl with level gauge with bowl guard drain guide 1/4 non-relieving flow direction: right to left drain cock with barb fitting: ? x ? nylon tubing name plate, caution plate for bowl, and pressure gauge in imperial units (psi, f) applicable model aw10 to 40 aw10 to 40 aw10 to 40 aw30, 40 aw20 aw30, 40 aw10 to 40 aw10 to 40 aw30, 40 aw10 to 40 metric thread (m5) rc npt g symbol 1 2 6 8 c j n r w z accessories optional specifications combination accessory/optional specifications with bracket (with set nut) float type auto drain (n.c.) float type auto drain (n.o.) square embedded type pressure gauge round pressure gauge with set nut (for panel mount) 0.02 to 0.2mpa setting metal bowl nylon bowl metal bowl with level gauge with bowl guard drain guide 1/4 non-relieving type flow direction: right to left drain cock with barb fitting: ? x ? nylon tubing name plate, caution plate for bowl, and pressure gauge in imperial units (psi, f) bcdegh 1268cjnrwz aw10 optional specification aw20 accessory b c d e g h ? ? ? ? ? ? ? ? ? ? aw30 to 40 symbol nil b c d e g h description with bracket float type auto drain (n.c.) float type auto drain (n.o.) with square embedded type pressure gauge (with limit indicator) with round pressure gauge (without limit indicator) with round pressure gauge (with limit indicator) with set nut (for panel mount) applicable model aw10 to 40 aw10 to 40 aw30, 40 aw20 to 40 aw10 aw20 to 40 aw10 to 40 ? when more than one specification is required, indicate in alphanumeric order. note 5) the only difference from the standard specifications is the adjusting spring for the regulator. it does not restrict the setting of 0.2mpa or more. note 6) without a valve function. note 7) for m5 and npt thread types. this product is for overseas use only according to the new measurement law. (the si unit type is provided for use in japan.) note 3) optional parts are not assembled and are supplied loose at the time of shipment (except for options c, d and e). note 4) applicable tube o.d for auto drain connection should be ?/8" in case npt thread port is chosen. integrated filter and regulator units save space and require less piping. note 1) drain guide is npt1/4 (applicable to aw30 and 40), and the exhaust port for auto drain comes with ?/8" one- touch fitting (applicable to aw30 and aw40). note 2) drain guide is g1/4 (applicable to aw30 and aw40). : combination available : varies depending on the model : combination not available : available only with npt thread applicable filter regulator symbol note 6) note 7) note 5) aw40 port size body size filter regulator 10 20 30 40 10 20 30 40 body size symbol m5 01 02 03 04 06 port size m5 1/8 1/4 3/8 1/2 3/4 note 4) note 4) made to order page 61 www.datasheet.net/ datasheet pdf - http://www..co.kr/
57 specific product precautions warning 1. residual pressure release (outlet pressure release) is not completed by releasing inlet pressure. to release residual pressure, use a filter regulator with a back flow mechanism. selection mounting & adjustment maintenance warning 1. replace the element every 2 years or when the pressure drop becomes 0.1mpa, whichever comes first, to prevent damage to the element. warning 1. set the regulator while checking the displayed values of the inlet and outlet pressure gauges. turning the knob excessively can cause damage to the internal parts. 2. the pressure gauge indicated with regulators for 0.02 to 0.2mpa setting is for 0.2mpa use only. exceeding 0.2mpa of pressure can damage the gauge. 3. do not use tools on the pressure regulator knob as this may cause damage. it must be operated manually. caution 1. be sure to unlock the knob before adjusting the pressure and lock it after setting the pressure. failure to follow this procedure can cause damage to the knob and the outlet pressure may fluctuate. pull the pressure regulator knob to unlock. (you can visually verify this with the "orange mark" that appears in the gap.) push the pressure regulator knob to lock. when the knob is not easily locked, turn it left and right a little and then push it (when the knob is locked, the "orange mark" will disappear). a w10 to 40 model port sizes fluid proof pressure maximum operating pressure set pressure range pressure gauge port size note 1) relief pressure ambient and fluid temperature nominal filtration rating drain capacity (cm 3 ) bowl material bowl guard construction weight (kg) aw40-06 3/4 rc, npt, g 1/4 45 0.75 accessory bracket assembly note 1) set nut pressure gauge float type auto drain applicable model aw10 m5 x 0.8 0.05 to 0.7mpa rc 1/16 note 2) 2.5 ? 0.09 aw40 1/4, 3/8, 1/2 rc, npt, g 1/4 45 standard 0.72 standard specifications 1.0mpa 0.2mpa aw30 1/4, 3/8 air 1.5mpa 1.0mpa 0.05 to 0.85mpa rc, npt, g 1/8 set pressure + 0.05mpa note 3) [at relief flow rate of 0.1l/min (anr)] e5 to 60 c (with no freezing) 5 m 25 polycarbonate relieving type 0.40 aw20 1/8, 1/4 rc, npt, g 1/8 8 option 0.32 aw40-06 aw40 aw30 aw20 aw10 ar10p-270as ar10p-260s g27-10 - r1 ? g27-10 - r1 note 3) ? ? ad17 note 1) pressure gauge connection threads are not required for regulators with a square embedded type pressure gauge (aw20 to a w40). note 2) use a bushing (part no: 131368) when connecting r 1/8 pressure gauge to r 1/16 gauge port. note 3) not applicable to aw10. round square embedded type round square embedded type n.o. n.c. aw20p-270as ar20p-260s g36-10 - 01 gc3-10as g36-2- 01 gc3-2as ? ad27 ar30p-270as ar30p-260s g36-10 - 01 gc3-10as g36-2- 01 gc3-2as ad38 ad38n note 6) ad37 ad37n note 6) ar40p-270as ar40p-260s g46-10 - 02 gc3-10as g46-2- 02 gc3-2as ad48 ad48n note 6) ad47 ad47n note 6) ar40p-270as ar40p-260s g46-10 - 02 gc3-10as g46-2- 02 gc3-2as ad48 ad48n note 6) ad47 ad47n note 6) accessory part no. note 1) assembly includes a bracket and set nuts. note 2) in part numbers for a round pressure gauge indicates a type of connection thread. no indication is necessary for r; however, i ndicate n for npt. contact p/a regarding the connection thread npt and supply of the pressure gauge for psi unit specifications. note 3) for 1mpa. note 4) includes one o-ring and 2 mounting screws. note 5) minimum operating pressure: n.o. typee0.1mpa; n.c. typee0.1mpa (ad17/27) and 0.15mpa (ad37/47). contact p/a regarding the specifications for psi unit and f. note 6) when n is specified in the end of part number of auto drain, applicable tube o.d should be ?3/8". orange mark note 5) note 2) note 4) note 4) be sure to read before handling. refer to pages 75 through 78 for safety instructions and f.r.l. unit precautions. 2. a knob cover is available to prevent careless operation of the knob. refer to features 1 for details. www.datasheet.net/ datasheet pdf - http://www..co.kr/
filter regulator a w10 to 40 58 flow characteristics (representative values) condition: inlet pressure 0.7mpa pressure characteristics (representative value) conditions: inlet pressure 0.7mpa; outlet pressure 0.2mpa; flow rate 20l/min (anr) 0.6 0.5 0.4 0.3 0.2 0.1 0 600 800 400 200 aw20 rc 1/4 flow rate l/min (anr) outlet pressure mpa 0 0.25 0.2 0.15 0 0 0.2 0.3 0.4 0.5 0.6 0.7 0.8 0.9 1 aw10 inlet pressure mpa outlet pressure mpa 0.25 0.2 0.15 0 0 0.2 0.3 0.4 0.5 0.6 0.7 0.8 0.9 1 aw20 inlet pressure mpa outlet pressure mpa 0.25 0.2 0.15 0 0 0.2 0.3 0.4 0.5 0.6 0.7 0.8 0.9 1 aw40 inlet pressure mpa outlet pressure mpa 0.25 0.2 0.15 0 0 0.2 0.3 0.4 0.5 0.6 0.7 0.8 0.9 1 aw40-06 inlet pressure mpa outlet pressure mpa 0.25 0.2 0.15 0 0 0.2 0.3 0.4 0.5 0.6 0.7 0.8 0.9 1 aw30 inlet pressure mpa outlet pressure mpa outlet pressure mpa 0.6 0.5 0.4 0.3 0.2 0.1 0 150 125 100 75 50 25 aw10 flow rate l/min (anr) 0 m5 set point set point set point set point set point 0.6 0.5 0.4 0.3 0.2 0.1 0 2000 aw40 rc 1/2 flow rate l/min (anr) outlet pressure mpa 0 0.6 0.5 0.4 0.3 0.2 0.1 0 3000 4000 1000 2000 aw40-06 rc 3/4 flow rate l/min (anr) outlet pressure mpa 0 0.6 0.5 0.4 0.3 0.2 0.1 0 1000 aw30 rc 3/8 flow rate l/min (anr) outlet pressure mpa 0 500 1500 1000 3000 www.datasheet.net/ datasheet pdf - http://www..co.kr/
construction aw10 aw30, 40 aw20 no. 1 2 no. 3 4 5 6 7 body bonnet description description valve assembly filter element diaphragm assembly bowl o-ring bowl assembly note 2) material material stainless steel brass, hnbr non-woven fabric weatherability nbr nbr pc part no. note platinum silver black zinc die-cast aluminum die-cast polyacetal aw10, 20 aw30 aw40, 40-06 parts list replacement parts aw10 ar10p-090s af10p-060s ar10p-150as note 1) c1sfp-260s c1sf aw20 aw20p-090as af20p-060s ar20p-150as c2sfp-260s c2sf aw30 aw30p-090as af30p-060s ar30p-150as c3sfp-260s c3sf note 3) aw40 aw40p-090as af40p-060s ar40p-150as c4sfp-260s c4sf note 3) aw40-06 aw40p-090as af40p-060s ar40p-150as c4sfp-260s c4sf note 3) note 1) aw10 is a piston and a gasket (ksyp-13) type assembly. note 2) including o-ring. contact p/a regarding the bowl assembly supply for psi and f unit specifications. note 3) the aw30 and aw40 bowl assembly comes with a bowl guard (steel band material). a w10 to 40 59 w t q y e r u w t q y e r u w q t e y r u ri ri ri www.datasheet.net/ datasheet pdf - http://www..co.kr/
filter regulator a w10 to 40 dimensions model aw10 aw20 aw30 aw40 aw40-06 port size m5 x 0.8 1/8, 1/4 1/4, 3/8 1/4, 3/8, 1/2 3/4 s 6.5 15.4 8 10.5 10.5 w 18.5 28.5 38.5 42.5 42.5 b 125 177 242 278 278 accessory specification panel mount with auto drain b 234 272 275 u 2 2.3 2.3 2.3 2.3 t 40 55 53 70 70 q 4.5 5.4 6.5 8.5 8.5 n 28 34 40 54 54 k 0 5 3.5 1.5 1.2 j 27 30.5 38.5 38.5 h 26 63 66 76 76 g 25 40 55 80 80 e 28 40 57 73 73 d 25 52 59 75 75 c 48 73 86 92 93 b 108 160 201 239 242 a 25 40 53 70 75 model aw10 aw20 aw30 aw40 aw40-06 with barb fitting b 209 247 250 with drain guide b 208 246 249 metal bowl b 107 160 214 251 255 metal bowl with level gauge standard specification m 25 30 41 50 50 p 30 44 46 54 56 y 14 19 21 21 z 6 7 7 7 v 18 30 31 35.5 37 with pressure gauge bracket mounting size optional specification aw30, 40 v d v d j j g g b c w n n q s t a e p u k h m w a b c q s t e u p k h m plate thickness aw30: max. 3.5 aw40: 5 plate thickness aw10, aw20: max. 3.5 square embedded type pressure gauge (option) square embedded type pressure gauge (option) pressure gauge port size bracket ( option ) port size pressure gauge ( option ) min. clearance for maintenance out p anel fitting dimension in out p anel fitting dimension pressure gauge port size bracket (option) min. clearance for maintenance port size pressure gauge ( option ) o s in out out in out in out aw10, 20 y z y z drain drain b b b b b b os o s b n.o.: black n.c.: gray m5 x 0.8 barb fitting applicable tubing: t0604 ?0 one-touch fitting width across flats 17 1/4 metal bowl with level gauge metal bowl a w10, aw20 aw30, aw40, aw40-06 drain cock with barb fitting with drain guide with auto drain (n.c.) with auto drain (n.o./n.c.) metal bowl applicable model optional specifications 60 www.datasheet.net/ datasheet pdf - http://www..co.kr/
filter regulator a w20 to 40 made to order specifications contact p/a for detailed dimensions, specifications, and lead times. 61 specifications part no. environment ambient temperature fluid temperature material ex430 low temperature e30 to 60 ? ? www.datasheet.net/ datasheet pdf - http://www..co.kr/
62 filter regulator a w20(k) to aw40(k) made to order specifications contact p/a for detailed dimensions, specifications, and lead times. made to order applicable models model port size aw20(k) aw30(k) aw40(k) aw40(k)-06 digital pressure switch (ise30- - - l) is supplied loose for mounting on pressure gauge connection port. e with digital pressure switch 1/8, 1/4 1/4, 3/8 1/4, 3/8, 1/2 3/4 note 8) consult p/a for detailed dimensions and available attachments and options. note 9) refer to p/a catalog cat.es100-42 for detailed specifications and instructions of digital pressure switch. how to order 03 30 1n aw f k b a optional specifications option note 3) port size body size thread type filter regulator with digital pressure switch (series ise30) x465 nil n note 1) f note 2) description 0.02 to 0.2mpa setting metal bowl nylon bowl metal bowl with level gauge with bowl guard drain guide 1/4 non-relieving type flow direction: right to left drain cock with barb fitting: ?6 x ?4 nylon tubing name plate and caution plate for bowl in imperial units (psi, f) applicable model aw20(k) to 40(k) aw20(k) to 40(k) aw20(k) to 40(k) aw30(k), 40(k) aw20(k) aw30(k), 40(k) aw20(k) to 40(k) aw20(k) to 40(k) aw30(k), 40(k) aw20(k) to 40(k) rc npt g with back flow mechanism nil k e e with back flow machanism description ? with bracket float type auto drain (n.c.) float type auto drain (n.o.) with set nut (for panel mount) applicable model ? aw20(k) to 40(k) aw20(k) to 40(k) aw30(k), 40(k) aw20(k) to 40(k) note 3) optional parts are not assembled and are supplied loose at the time of shipment (except for options c and d) note 4) applicable tube o.d for auto drain connection should be ?3/8" in case npt thread port is chosen. switch specifications 20 30 40 20 ? ? ? 30 ? ? 40 ? body size symbol 01 02 03 04 06 symbol 1 note 4) 2 6 8 c j note 5) n r w z note 6) symbol nil b c d h port size 1/8 1/4 3/8 1/2 3/4 symbol a b c d output specifications npn output pnp output 1 to 5v output 4 to 20ma output note 1) drain guide is npt1/4 (applicable to aw30 to 40), and the exhaust port for auto drain comes with ?3/8" one-touch fitting (applicable to aw30 to 40). note 2) drain guide is g1/4 (applicable to aw30 to 40). when more than one specification is required, indicate in ascending alphanumeric order. note 4) the only difference from the standard specifications is the adjusting spring for the regulator. it does not restrict the setting of 0.2mpa or more. note 5) without a valve function. note 6) for thread type npt. this product is for overseas use only according to the new measurement law. (the si unit type is provided for use in japan.) specifications part number suffix model set pressure range (mpa) set and display resolution (mpa) power supply voltage power consumption ex465 ise30- - - l e0.1 to 1 0.001 12 to 24 vdc 10%, ripple (p-p) 10% or less (with power supply polarity protection) 45 ma or less (70 ma or less for current output) pressure switch *pressure gauge port size: 1/8 note 7) optional parts are not assembled and are supplied loose at the time of shipment. note 7) note 4) note 4) www.datasheet.net/ datasheet pdf - http://www..co.kr/
filter regulator with back flow mechanism a w20k / 30k / 40k 63 note 1) set the inlet pressure 0.05mpa or higher than the set pressure. note 2) pressure gauge connection threads are not required for regulators with a square embedded type pressure gauge (aw20k to aw40k). accessories note 3) optional specifications 1n how to order standard specifications aw model port sizes fluid proof pressure maximum operating pressure set pressure range note 1) pressure gauge port size note 2) relief pressure ambient and fluid temperature nominal filtration rating drain capacity (cm 3 ) bowl material bowl guard construction weight (kg) aw20k 1/8, 1/4 rc, npt, g 1/8 8 option 0.32 aw40k 1/4, 3/8, 1/2 rc, npt, g 1/4 45 standard 0.72 aw40k-06 3/4 rc, npt, g 1/4 45 0.75 air 1.5mpa 1.0mpa 0.05 to 0.85mpa set pressure + 0.05mpa [at relief flow rate of 0.1l/min (anr)] e5 to 60 c (with no freezing) 5 m polycarbonate relieving type 30 03 be kf description 0.02 to 0.2mpa setting metal bowl nylon bowl metal bowl with level gauge with bowl guard drain guide 1/4 non-relieving type flow direction: right to left drain cock with barb fitting: ?6 x ?4 nylon tubing name plate, caution plate for bowl, and pressure gauge in imperial units (psi, f) symbol nil b c d e g h description ? with bracket float type auto drain (n.c.) note 2) float type auto drain (n.o.) note 2) with square embedded type pressure gauge (with limit indicator) with round pressure gauge (with limit indicator) with set nut (for panel mount) applicable model ? aw20k to 40k aw20k to 40k aw30k, 40k aw20k to 40k aw20k to 40k aw20k to 40k symbol 1 2 6 8 c j n r w z applicable model aw20k to 40k aw20k to 40k aw20k to 40k aw30k, 40k aw20k aw30k, 40k aw20k to 40k aw20k to 40k aw30k, 40k aw20k to 40k circuit diagram aw40k aw20k when the air supply is cut off and releasing the inlet pressure to the atmosphere, the residual pressure release of the outlet side can be ensured for a safety purpose. applicable model accessory bracket assembly set nut pressure gauge round square embedded type round square embedded type n.o. n.c. aw20k aw20p-270as ar20p-260s g36-10- 01 gc3-10as g36-2- 01 gc3-2as ? ad27 aw30k ar30p-270as ar30p-260s g36-10- 01 gc3-10as g36-2- 01 gc3-2as ad38 ad38n note 5) ad37 ad37n note 5) aw40k ar40p-270as ar40p-260s g46-10- 02 gc3-10as g46-2- 02 gc3-2as ad48 ad48n note 5) ad47 ad47n note 5) aw40k-06 ar40p-270as ar40p-260s g46-10- 02 gc3-10as g46-2- 02 gc3-2as ad48 ad48n note 5) ad47 ad47n note 5) accessory part no. filter regulator symbol symbol with back flow mechanism aw30k 1/4, 3/8 rc, npt, g 1/8 25 0.40 note 1) optional parts are not assembled and are supplied loose at the time of shipment (except for options c, d and e). note 2) applicable tube o.d for auto drain connection should be ?3/8" in case npt thread port is chosen. when more than one specification is required, indicate in alphanumeric order. note 4) the only difference from the standard specifications is the adjusting spring for the regulator. it does not restrict the setting of 0.2mpa or more. note 5) without a valve function. note 6) for npt thread type. this product is for overseas use only according to the new measurement law. (the si unit type is provided for use in japan.) 1.0mpa 0.2mpa float type auto drain note 1) assembly includes a bracket and set nuts. note 2) in part numbers for a round pressure gauge indicates a type of connection thread. no indication is necessary for r; however, indicate n for npt. contact p/a regarding the connection thread npt and pressure gauge supply for psi unit specifications. note 3) includes one o-ring and 2 mounting screws. note 4) minimum operating pressure: n.o. typee0.1mpa; n.c. typee0.1mpa (ad27) and 0.15mpa (ad37/47). contact p/a regarding the specifications for psi unit and f. note 5) when n is specified in the end of part number of auto drain, applicable tube o.d should be ?3/8". note 1) note 2) note 3) note 3) note 4) note) aw10 comes with a back flow mechanism as a standard feature. if the set pressure is not exceeding 0.15mpa, back flow may not occur. when a back flow mechanism is required with a set pressure of less than 0.15mpa, contact p/a. note 4) note 5) note 6) body size with back flow mechanism filter regulator thread type nil n note 1) f note 2) rc npt g port size note 1) drain guide is npt 1/4 (applicable to aw30k and 40k), and the exhaust port for auto drain comes with ?3/8" one-touch fitting (applicable to aw30k and aw40k). note 2) drain guide is g 1/4 (applicable to aw30k and aw40k). 20 30 40 20 ? ? ? 30 ? ? ? 40 ? body size symbol 01 02 03 04 06 port size 1/8 1/4 3/8 1/2 3/4 www.datasheet.net/ datasheet pdf - http://www..co.kr/
filter regulator with back flow mechanism a w20k / 30k / 40k 64 flow characteristics (representative values) outlet pressure mpa pressure characteristics (representative values) 0.25 0.2 0.15 0 1 0.9 0.8 0.7 0.6 0.5 0.4 0.3 0.2 aw20k inlet pressure mpa 0 aw40k be sure to read before handling. refer to pages 75 through 78 for safety instructions and f.r.l. unit precautions. specific product precautions mounting & adjustment maintenance warning 1. set the regulator while checking the displayed values of the inlet and outlet pressure gauges. turning the knob excessively can cause damage to the internal parts. 2. the pressure gauge included with regulators for 0.02 to 0.2mpa setting is for up to 0.2mpa use. exceeding 0.2mpa of pressure can damage the gauge. 3. do not use tools on the pressure regulator knob as this may cause damage. it must be operated manually. caution 1. be sure to unlock the knob before adjusting the pressure and lock it after setting the pressure. failure to follow this procedure can cause damage to the knob and the outlet pressure may fluctuate. ?pull the pressure regulator knob to unlock. (you can visually verify this with the "orange mark" that appears in the gap.) ?push the pressure regulator knob to lock. when the knob is not easily locked, turn it left and right a little and then push it (when the knob is locked, the "orange mark", i.e., the gap will disappear). 2. a knob cover is available to prevent careless operation of the knob. refer to features 1 for details. warning 1. replace the element every 2 years or when the pressure drop becomes 0.1mpa, whichever comes first to prevent damage to the element. orange mark outlet pressure mpa 0.25 0.2 0.15 0 1 0.9 0.8 0.7 0.6 0.5 0.4 0.3 0.2 inlet pressure mpa 0 outlet pressure mpa 0.25 0.2 0.15 0 1 0.9 0.8 0.7 0.6 0.5 0.4 0.3 0.2 aw30k inlet pressure mpa 0 aw40k-06 outlet pressure mpa 0.25 0.2 0.15 0 1 0.9 0.8 0.7 0.6 0.5 0.4 0.3 0.2 inlet pressure mpa 0 condition: inlet pressure 0.7mpa inlet pressure 0.7mpa outlet pressure 0.2mpa flow rate 20l/min (anr) conditions: set point set point set point set point aw20k aw30k 0.6 0.5 0.4 0.3 0.2 0.1 0 600 800 400 200 rc 1/4 flow rate l/min (anr) outlet pressure mpa 0 0.6 0.5 0.4 0.3 0.2 0.1 0 2000 aw40k rc 1/2 flow rate l/min (anr) outlet pressure mpa 0 0.6 0.5 0.4 0.3 0.2 0.1 0 3000 4000 1000 2000 aw40k-06 rc 3/4 flow rate l/min (anr) outlet pressure mpa 0 1000 3000 rc 3/8 outlet pressure mpa 0.6 0.5 0.4 0.3 0.2 0.1 0 1000 flow rate l/min (anr) 0 500 1500 www.datasheet.net/ datasheet pdf - http://www..co.kr/
a w20k / 30k / 40k 65 operating principle aw20k to 40k when the inlet pressure (p1) is higher than the set pressure, the check valve w closes and operates as a normal regulator (figure 1). when the inlet pressure (p1) is shut off and released, the check valve w , opens and the pressure in the diaphragm chamber q is released into the inlet side (figure 2). this lowers the pressure in the diaphragm chamber q , and the force generated by pressure regulator spring e lifts the diaphragm. valve r opens through the stem, and the outlet pressure is released to the inlet side (figure 3). no. 1 2 parts list body bonnet zinc die-cast aluminum die-cast platinum silver black polyacetal material aw20k aw30k aw40k aw40k-06 description note 1) including o-ring. contact p/a regarding the bowl assembly supply for psi and f unit specifications. note 2) bowl assembly for aw30k to aw60k includes a bowl guard (steel band material). note 3) check valve construction includes the check valve itself, check valve cover, and 2 screws. no. 3 4 5 6 7 8 filter element diaphragm assembly bowl o-ring bowl assembly note 1) check valve assembly note 3) non-woven fabric weatherability nbr nbr pc pom, pbt valve assembly stainless steel brass, hnbr parts no. aw20k aw20p-090as af20p-060s ar20p-150as c2sfp-260s c2sf ar20kp-020as aw30k aw30p-090as af30p-060s ar30p-150as c3sfp-260s c3sf note 2) ar20kp-020as aw40k aw40p-090as af40p-060s ar40p-150as c4sfp-260s c4sf note 2) ar20kp-020as aw40k-06 aw40p-090as af40p-060s ar40p-150as c4sfp-260s c4sf note 2) ar20kp-020as description material note construction figure 2 in (inlet pressure) a a w t q y e r r q e u back flow pressure in diaphragm chamber inlet pressure (in) figure 1 normal pressure in diaphragm chamber inlet pressure (in) a a out (outlet pressure) out (outlet pressure) in (inlet pressure) out (outlet pressure) in (inlet pressure) o t k c o l h s u p smc o t k c o l h s u p smc a-a i a-a w figure 3 www.datasheet.net/ datasheet pdf - http://www..co.kr/
filter regulator with back flow mechanism a w20k / 30k / 40k 66 dimensions aw 20k /30k /40k model aw20k aw30k aw40k aw40k-06 1/8, 1/4 1/4, 3/8 1/4, 3/8, 1/2 3/4 port size standard specification accessory specification with pressure gauge bracket mounting size panel mount with auto drain w y z plate thickness aw20k, 30k: max. 3.5 aw40k: max. 5 panel fitting dimension a 40 53 70 75 b 160 201 239 242 c 73 86 92 93 d 52 59 75 75 e 40 57 73 73 h 63 66 76 76 j 27 30.5 38.5 38.5 k 5 3.5 1.5 1.2 m 30 41 50 50 n 34 40 54 54 p 44 46 54 56 q 5.4 6.5 8.5 8.5 s 15.4 8 10.5 10.5 t 55 53 70 70 u 2.3 2.3 2.3 2.3 v 30 31 35.5 37 w 28.5 38.5 42.5 42.5 y 14 19 21 21 z 6 7 7 7 b 177 242 278 278 g 40 55 80 80 model aw20k aw30k aw40k aw40k-06 1/8, 1/4 1/4, 3/8 1/4, 3/8, 1/2 3/4 port size optional specification with barb fitting with drain guide metal bowl metal bowl with level gauge b 209 247 250 b 208 246 249 b 234 272 275 b 160 214 251 255 d v t n s q b c u hm j k p g min. clearance for maintenance pressure gauge port size drain bracket (option) port size square embedded type pressure gauge (option) pressure gauge (option) in out a in out out e b b b b b b os o s b n.o.: black n.c.: gray m5 x 0.8 barb fitting applicable tubing: t0604 ?0 one-touch fitting width across flats 17 1/4 metal bowl with level gauge metal bowl a w20k aw30k, aw40k, ac40k-06 drain cock with barb fitting with drain guide with auto drain (n.c.) with auto drain (n.o./n.c.) metal bowl applicable model optional specifications www.datasheet.net/ datasheet pdf - http://www..co.kr/
67 mist separator regulator a wm20 / 3 0/40 how to order accessory/optional specification combinations accessories optional specifications accessory/optional specifications with bracket (with set nut) float type auto drain (n.c.) float type auto drain (n.o.) square embedded type pressure gauge round pressure gauge with set nut (for panel mount) 0.05 to 0.2mpa setting metal bowl nylon bowl metal bowl with level gauge with bowl guard drain guide 1/4 non-relieving type flow direction: right to left drain cock with barb fitting: ? x ? nylon tubing name plate, caution plate for bowl, and pressure gauge in imperial units (psi, f) awm20 bcdegh 2 168cjrz w n awm30 to 40 applicable mist separator regulator optional specification accessory b c d e g h ? ? ? ? ? ? ? ? ? ? combination symbol 03 be f 30 1n awm optional specifications thread type nil n note 1) f note 2) rc npt g description 0.05 to 0.2mpa setting metal bowl nylon bowl metal bowl with level gauge with bowl guard drain guide 1/4 non-relieving flow direction: right to left drain cock with barb fitting: ? x ? nylon tubing name plate, caution plate for bowl, and pressure gauge in imperial units (psi, f) symbol 1 note 4) 2 6 8 c j note 5) n r w z note 6) applicable model awm20 to 40 awm20 to 40 awm20 to 40 awm30, 40 awm20 awm30, 40 awm20 to 40 awm20 to 40 awm30, 40 awm20 to 40 accessories note 3) symbol nil b c d e g h applicable model awm20 to 40 awm20 to 40 awm30, 40 awm20 to 40 awm20 to 40 awm20 to 40 description with bracket float type auto drain (n.c.) note 2) float type auto drain (n.o.) note 2) with square embedded type pressure gauge (with limit indicator) with round pressure gauge (with limit indicator) with set nut (for panel mount) filtration: 0.3 m awm20 awm40 series awm is a compo- nent made up of a regula- tor and a mist separator that are integrated to pro- vide optimum results in applications such as clean-air blow operations. ? when more than one specification is required, indicate in alphanumeric order. note 4) the only difference from the standard specifications is the adjusting spring for the regulator. it does not restrict the setting of 0.2mpa or more. note 5) without a valve function. note 1) drain guide is npt1/4 (applicable to awm30 and 40), and the exhaust port for auto drain comes with ?/8" one- touch fitting (applicable to awm30 and awm40). note 2) drain guide is g1/4 (applicable to awm30 and awm40). : combination available : varies depending on the model : combination not available : available only with npt thread port size mist separator regulator body size 20 30 40 20 30 40 body size symbol 01 02 03 04 port size 1/8 1/4 3/8 1/2 note 1) optional parts are not assembled and are supplied loose at the time of shipment (except for options c, d and e). note 2) applicable tube o.d for auto drain connection should be ?/8" in case npt thread port is chosen. note 6) for npt thread type. this product is for overseas use only according to the new measurement law. (the si unit type is provided for use in japan.) www.datasheet.net/ datasheet pdf - http://www..co.kr/
mist separator regulator a wm20 / 3 0/40 68 specific product precautions air supply mounting & adjustment orange mark selection maintenance warning 1. replace the element every 2 years or when the pressure drop becomes 0.1mpa, whichever comes first, to prevent damage to the element. warning 1. residual pressure release (outlet pressure release) is not complete by releasing inlet pressure. contact p/a regarding residual pressure release. caution 1. install an air filter (series af) as a pre- liminary filter on the inlet side of the mist separator regulator to prevent prema- ture clogging. warning 1. set the regulator while checking the displayed values of the inlet and outlet pressure gauges. turning the knob excessively can cause damage to the internal parts. 2. the pressure gauge included with mist separator regulators for 0.05 to 0.2mpa setting is for up to 0.2mpa only. exceed- ing 0.2mpa of pressure can damage the gauge. 3. do not use tools on the pressure regula- tor knob as this may cause damage. it must be operated manually. caution 1. be sure to unlock the knob before adjusting the pressure and lock it after setting the pressure. failure to follow this procedure can cause damage to the knob and the outlet pressure may fluctuate. pull the pressure regulator knob to unlock. (you can visually verify this with the "orange mark" that appears in the gap.) push the pressure regulator knob to lock. when the knob is not easily locked, turn it left and right a little and then push it (when the knob is locked, the "orange mark" i.e., the gap, will disappear). standard specifications model port sizes fluid proof pressure maximum operating pressure set pressure range pressure gauge port size note 1) ambient and fluid temperature nominal filtration rating outlet side oil mist concentration rated flow l/min (anr) note 4) bowl material bowl guard drain capacity (cm 3 ) construction weight (kg) awm20 1/8, 1/4 rc, npt, g 1/8 150 option 8 0.44 awm30 1/4, 3/8 air 1.5mpa 1.0mpa 0.05 to 0.85mpa rc, npt, g 1/8 e5 to 60 c (with no freezing) 0.3 m (95% filtered particle size) max.1.0 mg /m 3 (anr) (approx. 0.8ppm) note 2) note 3) 330 polycarbonate 25 relieving type 0.59 awm40 1/4, 3/8, 1/2 rc, npt, g 1/4 820 45 1.25 accessory part no. awm20 aw20p-270as ar20p-260s g36-10- www.datasheet.net/ datasheet pdf - http://www..co.kr/
69 parts list replacement parts construction pressure characteristics awm20 awm30, 40 no. 1 2 description body bonnet note platinum silver black material awm30 aluminum die-cast awm20 zinc die-cast polyacetal awm40 awm20 awm20p-090as afm20p-060as ar20p-150as c2sfp-260s c2sf awm40 awm40p-090as af40p-060as ar40p-150as c4sfp-260s c4sf note 2) description valve assembly element assembly diaphragm assembly bowl o-ring bowl assembly note 1) material brass, hnbr ? weatherability nbr nbr pc part no. awm30 awm30p-090as afm30p-060as ar30p-150as c3sfp-260s c3sf note 2) no. 3 4 5 6 7 note 1) including o-ring. contact p/a regarding the bowl assembly supply for psi and f unit specifications. note 2) bowl assembly for awm30 and awm40 comes with a bowl guard (steel band material). flow characteristics (representative values) condition: inlet pressure 0.7mpa a wm20 / 3 0/40 awm20 rc 1/4 awm30 rc 3/8 awm40 rc 1/2 awm20 awm30 awm40 conditions: inlet pressure 0.7mpa; outlet pressure 0.2mpa; flow rate: 20l/min (anr) flow rate l/min (anr) outlet pressure mpa flow rate l/min (anr) outlet pressure mpa outlet pressure mpa flow rate l/min (anr) inlet pressure mpa outlet pressure mpa inlet pressure mpa outlet pressure mpa inlet pressure mpa outlet pressure mpa drain in out w t q e y r u ri w t q e y r u 0 00 01 0 0 0 0 0 0 0 0 0 00 01 0 0 0 0 0 0 0 0 0 00 01 0 0 0 0 0 0 0 0 et oit et oit et oit www.datasheet.net/ datasheet pdf - http://www..co.kr/
dimensions awm30, 40 awm20 model awm20 awm30 awm40 port size 1/8, 1/4 1/4, 3/8 1/4, 3/8, 1/2 s 15.4 8 10.5 w 28.5 38.5 42.5 b 190 242 278 accessory specification panel mount with auto drain b 234 272 u 2.3 2.3 2.3 t 55 53 70 q 5.4 6.5 8.5 n 34 40 54 k 5 3.5 1.5 j 27 30.5 38.5 h 63 66 76 g 45 50 70 e 40 57 73 d 52 59 75 c 73 86 92 b 173 201 239 a 40 53 70 model awm20 awm30 awm40 with barb fitting b 209 247 with drain guide b 208 246 metal bowl b 173 214 252 metal bowl with level gauge y 14 19 21 z 6 7 7 standard specification m 30 41 50 p 44 46 54 v 30 31 35.5 with pressure gauge bracket mounting size optional specification panel fitting dimension w plate thickness awm20: max. 3.5 plate thickness awm30: max. 3.5 awm40: max. 5 panel fitting dimension mist separator regulator a wm20 / 3 0/40 70 y z y z w out os out drain a s b c t n q pressure gauge port size in out in out in out v g p k m u h d j e port size square embedded type pressure gauge (option) pressure gauge (option) bracket (option) min. clearance for maintenance b c q s t n a pressure gauge port size drain in out v g e m h d j k p port size square embedded type pressure gauge (option) pressure gauge (option) bracket (option) min. clearance for maintenance u b b b b b b os o s b n.o.: black n.c.: gray m5 x 0.8 barb fitting applicable tubing: t0604 ?0 one-touch fitting width across flats 17 1/4 metal bowl with level gauge metal bowl a wm20 awm30, awm40 drain cock with barb fitting with drain guide with auto drain (n.c.) with auto drain (n.o./n.c.) metal bowl applicable model optional specifications www.datasheet.net/ datasheet pdf - http://www..co.kr/
71 micro-mist separator regulator a wd20 / 3 0/40 awd20 accessory/optional specification combinations optional specifications accessory/optional specifications with bracket (with set nut) float type auto drain (n.c.) float type auto drain (n.o.) square embedded type pressure gauge round pressure gauge panel mount (with set nut) 0.05 to 0.2mpa setting metal bowl nylon bowl metal bowl with level gauge with bowl guard drain guide 1/4 non-relieving type flow direction: right to left drain cock with barb fitting: ? x ? nylon tubing name plate, caution plate for bowl, and pressure gauge in imperial units (psi, f) awd20 bcdegh 2 168cjrz w n awd30 to 40 applicable micro-mist separator regulator optional specification accessory b c d e g h ? ? ? ? ? ? ? ? ? ? combination symbol 03 be f 30 1n awd optional specifications micro-mist separator regulator thread type nil n note 1) f note 2) rc npt g description 0.05 to 0.2mpa setting metal bowl nylon bowl metal bowl with level gauge with bowl guard drain guide 1/4 non-relieving flow direction: right to left drain cock with barb fitting: ? x ? nylon tubing name plate, caution plate for bowl, and pressure gauge in imperial units (psi, f) symbol 1 note 4) 2 6 8 c j note 5) n r w z note 6) applicable model awd20 to 40 awd20 to 40 awd20 to 40 awd30, 40 awd20 awd30, 40 awd20 to 40 awd20 to 40 awd30, 40 awd20 to 40 accessories note 3) symbol nil b c d e g h applicable model awd20 to 40 awd20 to 40 awd30, 40 awd20 to 40 awd20 to 40 awd20 to 40 description with bracket float type auto drain (n.c.) note 4) float type auto drain (n.o.) note 4) with square embedded type pressure gauge (with limit indicator) with round pressure gauge (with limit indicator) with set nut (for panel mount) how to order awd40 series awd is a component made up of a regulator and a micro-mist separator that are integrated to provide optimum results in applications such as ultraclean air blow opera- tions. filtration: 0.01 m note 1) drain guide is for npt1/4 (applicable to awd30 and awd40), and the exhaust port for auto drain comes with ?/8" one-touch fitting (applicable to awd30 and awd40). note 2) drain guide is g1/4 (applicable to awd30 and awd40). ? when more than one specification is required, indicate in alphanumeric order. note 4) the only difference from the standard specifications is the adjusting spring for the regulator. it does not restrict the setting of 0.2mpa or more. note 5) without a valve function. : combination available : varies depending on the model : combination not available : available only with npt thread accessories port size body size 20 30 40 20 30 40 body size symbol 01 02 03 04 port size 1/8 1/4 3/8 2/1 note 3) optional parts are not assembled and are supplied loose at the time of shipment (except for options c, d and e). note 4) applicable tube o.d for auto drain connection should be ?/8" in case npt thread port is chosen. note 6) for npt thread type. this product is for overseas use only according to the new measurement law. (the si unit type is provided for use in japan.) www.datasheet.net/ datasheet pdf - http://www..co.kr/
micro-mist separator regulator a wd20 / 3 0/40 specific product precautions air supply mounting & adjustment orange mark selection maintenance standard specifications model port sizes fluid proof pressure maximum operating pressure set pressure range pressure gauge port size note 1) ambient and fluid temperature nominal filtration rating outlet side oil mist concentration rated flow l/min (anr) bowl material bowl guard drain capacity (cm 3 ) construction weight (kg) awd20 1/8, 1/4 rc, npt, g 1/8 90 option 8 0.44 note 3) note 2) awd30 1/4, 3/8 air 1.5mpa 1.0mpa 0.05 to 0.85mpa rc, npt, g 1/8 e5 to 60 c (with no freezing) 0.01 m (95% filtered particle size) max. 0.1 mg /m 3 (anr) (before saturated with hydraulic fluid: 0.01 mg /m 3 (anr) or less, approx. 0.008ppm ) 180 polycarbonate 25 relieving type 0.59 awd40 1/4, 3/8, 1/2 rc, npt, g 1/4 450 45 1.25 accessory part no. awd20 aw20p-270as ar20p-260s g36-10- 01 gc3-10as g36-2- 01 gc3-2as ? ad27 awd30 ar30p-270as ar30p-260s g36-10- 01 gc3-10as g36-2- 01 gc3-2as ad38 ad38n note) ad37 ad37n note) awd40 ar40p-270as ar40p-260s g46-10- 02 gc3-10as g46-2- 02 gc3-2as ad48 ad48n note) ad47 ad47n note) 1.0mpa 0.2mpa applicable model accessory bracket assembly note 1) set nut round square embedded type round square embedded type n.o. n.c. 72 note 1) pressure gauge connection threads are not required for the regulator with a square embedded type pressure gauge (awd20 to 40). note 2) when the compressor oil mist discharge concentration is 30 mg /m 3 (anr). note 3) bowl o-ring and other o-rings are slightly lubricated. note 4) when the outlet pressure is 0.5mpa. (the rated flow varies depending on the set pressure.) keep the air flow within the rated flow to prevent an outflow of lubricant to the outlet side. note 1) assembly includes a bracket and set nuts. note 2) in part numbers for a round pressure gauge indi- cates a type of connection thread. no indication is necessary for r; however, indicate n for npt. con- tact p/a regarding the npt connection thread and pressure gauge supply for psi unit specifications. note 3) includes one o-ring and 2 mounting screws. note 4) minimum operating pressure: n.o. typee0.1mpa; n.c. typee0.1mpa (ad27) and 0.15mpa (ad37/47). set the pressure to allow a pressure drop when the fluid flows. contact p/a regarding the specifica- tions for psi unit and f. note 4) pressure gauge note 2) float type auto drain note 4) warning 1. residual pressure release (outlet pressure release) is not complete by releasing inlet pressure. contact p/a regarding the residual pressure release. caution 1. install an air filter (series afm) as a preliminary filter on the inlet side of the micro-mist separator to prevent premature clogging. warning 1. replace the element every 2 years or when the pressure drop becomes 0.1mpa, whichever comes first, to prevent damage to the element. warning 1. set the regulator while checking the displayed values of the inlet and outlet pressure gauges. turning the knob excessively can cause damage to the internal parts. 2. the pressure gauge included with micro- mist separator regulator for 0.05 to 0.2mpa setting is for up to 0.2mpa only. exceeding 0.2mpa of pressure can damage the gauge. 3. do not use tools on the pressure regulator knob as this may cause damage. it must be operated manually. caution 1. be sure to unlock the knob before adjusting the pressure and lock it after setting the pressure. failure to follow this procedure can cause damage to the knob and the outlet pressure may fluctuate. pull the pressure regulator knob to unlock. (you can visually verify this with the "orange mark" that appears in the gap.) push the pressure regulator knob to lock. when the knob is not easily locked, turn it left and right a little and then push it (when the knob is locked, the "orange mark" will disappear). 2. a knob cover is available to prevent careless operation of the knob. refer to features 1 for details. note 3) note 3) be sure to read before handling. refer to pages 75 through 78 for safety instructions, f.r.l. unit precautions. standard note) when n is specified in the end of part number of auto drain, applicable tube o.d should be ?3/8". www.datasheet.net/ datasheet pdf - http://www..co.kr/
a wd20 / 3 0/40 73 parts list replacement parts construction pressure characteristics (representative value) conditions: inlet pressure 0.7mpa; outlet pressure 0.2mpa; flow rate: 20l/min (anr) awd20 awd30, 40 no. 1 2 description body bonnet note platinum silver black material awd30 aluminum die-cast awd20 zinc die-cast polyacetal awd40 awd20 awm20p-090as afd20p-060as ar20p-150as c2sfp-260s c2sf awd40 awm40p-090as afd40p-060as ar40p-150as c4sfp-260s c4sf note 2) description valve assembly element assembly diaphragm assembly bowl o-ring bowl assembly note 1) materials brass, hnbr ? weatherability nbr nbr pc parts no. awd30 awm30p-090as afd30p-060as ar30p-150as c3sfp-260s c3sf note 2) no. 3 4 5 6 7 note 1) including o-ring. contact p/a regarding the bowl assembly supply for psi and f unit specifications. note 2) bowl assembly for awd30 and awd40 comes with a bowl guard (steel band material). flow characteristics (representative value) condition: inlet pressure 0.7mpa awd20 rc 1/4 awd30 rc 3/8 awd40 rc 1/2 awd20 awd30 awd40 flow rate l/min (anr) outlet pressure mpa flow rate l/min (anr) outlet pressure mpa flow rate l/min (anr) outlet pressure mpa outlet pressure mpa inlet pressure mpa outlet pressure mpa inlet pressure mpa outlet pressure mpa inlet pressure mpa drain in out w t q e y r u ri w t q e y r u 0 00 01 0 0 0 0 0 0 0 0 0 00 01 0 0 0 0 0 0 0 0 0 00 01 0 0 0 0 0 0 0 0 et oit et oit et oit www.datasheet.net/ datasheet pdf - http://www..co.kr/
a s b c t n q pressure gauge port size in out in out in out dimensions awd30, 40 awd20 model awd20 awd30 awd40 port size 1/8, 1/4 1/4, 3/8 1/4, 3/8, 1/2 s 15.4 8 10.5 w 28.5 38.5 42.5 b 190 242 278 accessory specification panel mount with auto drain b 234 272 u 2.3 2.3 2.3 t 55 53 70 q 5.4 6.5 8.5 n 34 40 54 k 5 3.5 1.5 j 27 30.5 38.5 h 63 66 76 g 45 50 70 e 40 57 73 d 52 59 75 c 73 86 92 b 173 201 239 a 40 53 70 model awd20 awd30 awd40 with barb fitting b 209 247 with drain guide b 208 246 metal bowl b 173 214 252 metal bowl with level gauge y 14 19 21 z 6 7 7 standard specification m 30 41 50 p 44 46 54 v 30 31 35.5 with pressure gauge bracket mounting size optional specification plate thickness awd20: max. 3.5 panel fitting dimension plate thickness awd30: max. 3.5 awd40: max. 5 panel fitting dimension micro-mist separator regulator a wd20 / 3 0/40 74 w y z y z w out out o s v g p k m h d j e port size square embedded type pressure gauge (option) pressure gauge (option) bracket (option) min. clearance for maintenance u q b c s t n a pressure gauge port size in out k v g e m h d j p port size square embedded type pressure gauge (option) pressure gauge (option) bracket (option) min. clearance for maintenance u drain drain b b b b b b os o s b n.o.: black n.c.: gray m5 x 0.8 barb fitting applicable tubing: t0604 ?0 one-touch fitting width across flats 17 1/4 metal bowl with level gauge metal bowl afd20 awd30, awd40 drain cock with barb fitting with drain guide with auto drain (n.c.) with auto drain (n.o./n.c.) metal bowl applicable model optional specifications www.datasheet.net/ datasheet pdf - http://www..co.kr/

▲Up To Search▲

Price & Availability of AW20-XXXX

	To Download AW20-XXXX Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .